|
Retired Product |
| SRA-120 2-Channel Convection Cooled
Amplifier SRA-TR2 60W/70V Transformer Option |
retired 08/01/2006 |
| Specifications SRA-120 - SRA-TR2 |
Manuals SRA-120 - SRA-TR2 |
Photos | Brochure |
| Suggested Replacement
- SRA-2075/TRA-2075 |
SRA-2075/SRA-120 Comparison Sheet |
 |
 |
 |
 |
|
The (Classic) SRA-120 professional stereo amplifier offers superior
sonic quality, rugged construction, and many useful features in a single rack
space chassis. The compact SRA-120 is suitable for full-range applications, such
as small control room monitor systems or as an ideal headphone distribution amp.
With its excellent bandwidth, the SRA-120 is also well-suited for driving the
high end of a bi-amplification sound system setup. The amplifier will deliver 60 watts per channel into 4 ohms stereo, 45 watts per channel into 8 ohms stereo, or 120 watts total into 8 ohms mono-bridged. The amplifier design is based on Class A voltage amplifier stages with a complementary bipolar output section for low distortion and excellent overload behavior. Features include turn-on delay circuitry and instantaneous turn-off to eliminate any transients to the speaker. Each channel will also independently turn off its output if an overheated condition occurs. The SRA-120 also features rear panel switches to select between two choices of input sensitivity, stereo or mono operation, or normal or bridged mode. Rear panel input connections may be made via 1/4" balanced phone jacks or barrier strips with ground lift provision. Level attenuators for each channel are provided on the front panel, along with a stereo headphone jack. Status L.E.D.'s on each channel include signal present, clip alert, and "protect-mode" indication. The SRA-120 is approximately 10" deep and weighs in at under 20 pounds, yet has performance characteristics and features typically found only in larger, more costly competitors.  High
output power in a small, convection cooled package
Class-A full complementary front end for sonic quality
Independent thermal and short circuit protectionSRA-TR2 60W/70V Transformer Option Accessory for the SRA-120 - 60W, single rack space convection-cooled amplifier. The SRA-TR2 60W/70V Transformer Option provides two 60W transformers and a screw terminal block mounted on a 2RU panel. The SRA-TR2 is capable of converting the power output of the SRA-120 to drive 70 Volt lines. Primary leads are 14" and the secondary leads are terminated to a screw terminal block mounted on the back of the panel. Input impedance is 4 ohms. |
| top | Home | Email-Product Support | Email-Sales | Email-Service |