Retired Product

FTX-1501/2001 MOSFET Amplifiers

retired - 09/01/2006

Spec Sheets FTX-1501  FTX-2001

All Spec Sheets

All Manuals

All Line Art

All Brochures

POWER OUTPUT FTX2001 (per channel, both channels driven at 1kHz, <.1%THD) 8 Ohms: 300 Watts RMS 4 Ohms: 475 Watts RMS 2 Ohms: 550 Watts RMS (bridged mono mode) 8 Ohms: 950 Watts RMS 4 Ohms: 1100 Watts RMS (per channel from 20Hz-20kHz, <.1%THD) 8 Ohms: 250 Watts RMS 4 Ohms: 400 Watts RMS FTX1501 (per channel, both channels driven at 1kHz, <.1%THD) 8 Ohms: 185 Watts RMS 4 Ohms: 275 Watts RMS 2 Ohms: 275 Watts RMS (bridged mono mode) 8 Ohms: 550 Watts RMS 4 Ohms: 550 Watts RMS (per channel from 20Hz-20kHz, <.1%THD) 8 Ohms: 190 Watts RMS 4 Ohms: 280 Watts RMS FREQUENCY RESPONSE +/-0.2dB 20Hz-20kHz +/-3dB 8Hz-100kHz RISE TIME 2uS 10%-90% SLEW RATE 50V/us BANDWIDTH 100kHz FULL POWER INPUT SENSITIVITY FTX2001: 1.7V FTX1501: 1.3V TOTAL HARMONIC DISTORTION <.004% (rated power, 8 Ohms, 1kHz) <.01% (rated power, 8 Ohms, 20Hz) <.05% (rated power, 8 Ohms, 20kHz) IM DISTORTION SMPTE: .007%, 8 Ohms IHF: .01%, 8 Ohms OUTPUT HUM AND NOISE -105dB referenced to full output (20Hz-20kHz, unweighted) DAMPING FACTOR >250 (8 Ohms, 20Hz-1kHz) INPUT IMPEDANCE 20kOhms, balanced AMPLIFIER PROTECTION Fuseless short circuit protection, DC, ultrasonic and RF protection, turn-on delay COOLING Forced-air INDICATORS 11 segment level meters with true-clipping red LED. Red "protect" LED indicates when output protect relay opens. POWER REQUIREMENTS 120VAC, 50-60Hz (240VAC available) SIZE FTX2001: 19"W x 5.25"H x 16.5"D FTX1501: 19"W x 3.5"H x 16.5"D SHIPPING WEIGHT FTX2001: 60 lb. FTX1501: 46 lb.

top

Home

Email-Product Support

Email-Service

Email-Sales