Retired Product

DLM-821 Ducking Line Mixer

Spec Sheet

All Spec Sheets

All Manuals

All Line Art

All Brochures

General Specifications THD: < .05 % at +20 dBu, 20 Hz-20 KHz HUM & NOISE (20 Hz-20 KHz noise bandwidth): < -100 dBu residual output noise, all levels at minimum < -83 dBu MASTER OUT, MASTER LEVEL and one INPUT LEVEL at nominal (unity gain) FREQUENCY RESPONSE: ± 0.2 dB 20 Hz-20 KHz VOLTAGE GAIN: 0.0 ±1 dB —CH. INPUTS or SUB INPUTS to MASTER OUTPUTS, levels at nominal 25 ± 1 dB —CH. INPUT to MASTER OUTPUTS, levels at maximum 56 ± 1 dB —CH. 1 or 2 INPUT in MIC position to MASTER OUTPUTS MAX. INPUT LEVEL Mic: -7dBu Line: +23dBu MAX. OUTPUT LEVEL Line: +22dBu Mic: -17dBu INPUT IMPEDANCE (1-4) Balanced 2.3K ohm (5-8) Balanced 20K ohm OUTPUT IMPEDANCE: 200 ohm (quasi-balanced) CONNECTIONS: Euroblock CROSSTALK: < -80 dB adjacent inputs or input to output at 1 KHz; < -60 dB adjacent inputs or input to output at 20 KHz DUCKER DEPTH: Factory configured for -20dB, internally selectable for -90dB DUCKER THRESHOLD: -30dBu Line, -60dBu mic DUCKER SELECTION: Factory configured for ch. 1 & 2 to duck ch. 3-8. Internal ch.2 disable, left or right disable DUCKER PRIORITY: Ch. 1 priority enable where ch. 1 mutes all other inputs VU METERS: Two 5-segment LED meters. 0 VU = +4 dBu PEAK INDICATORS: Left and right peak CLIP indicators illuminate when any internal signal amplifier is 3 dB below clipping POWER REQUIREMENTS: 98 - 125 VAC , 50-60 Hz, 15 watts. (240 VAC available) DIMENSIONS: 19” L x 1.75” H x 7.3” D (483mm L x 44.5mm H x 184mm D) SHIPPING WEIGHT: 10 lbs. (4.5 Kg) shipping, 7.2 lbs. (3.3 Kg) net

top

Home

Email-Product Support

Email-Service

Email-Sales