|
Accessories |
| WR-1 | WR-2 - Wall Mount Controls |
| Wiring Diagrams WR - WR-e |
Word Document Templates | PE-Series Amplifiers |
 WR-1 |
 WR-2 |
| Remote control your amplifier from any location.
These devices fit in standard wall boxes and use low gauge wire for hook-up.
They are available in white or beige and can be covered with a standard
decora plate (not included). Labels for these devices can be made with a
template (download Word Document Template above). WR-1 (PE-Series amplifiers only) The WR-1 can be used with PE-Series amplifiers for remote level control. Each volume control is connected to a euroblock terminal on the WR-1 circuit board, which in turn must be wired to the PE amplifier back panel euroblock connector labeled "Remote Level Control". By connecting a volume control to a specific pin (1 or 2), you may adjust the level of the amplifier. When using Proteane Software, the amplifier's front panel controls may be disabled allowing level control from the WR-1 or a PC. WR-2 (PE-, SRA- and TRA-Series amplifiers) The WR-2 allows you to enable or disable the power 'Standby Mode' of an amplifier. A pushbutton switch connects to a euroblock on the rear of the amplifier (labeled "Standby"). Pressing a button will toggle the amplifier from standby or on. Windows are provided for a user-generated label. |
| top | Home | Email-Product Support | Email-Service | Email-Sales |