PE Series High Performance Amplifiers
PE Series Multichannel Amplifier Manual
PE Series Brochure
PRODUCTS
Model |
800 |
1200 |
1800 |
2400 |
3000 |
3800 |
Power Requirements - 1/8 Power, Pink Noise, 4Ω |
 |
|
||||
|
420W |
540W |
611W |
790W |
1010W |
1220W |
Current Requirements 8Ω, Both Channels Driven (typ=1/8 power, pink noise) |
||||||
Idle |
2.4A |
2.8A |
2.4A |
2.4A |
2.6A |
2.8A |
Idle (typ) |
6.6A |
8.6A |
8.4A |
10.4A |
12.4A |
14.6A |
Idle (max) |
13.6A |
20.2A |
26.2A |
33A |
42A |
50A |
Current Requirements 4Ω, Both Channels Driven (typ=1/8 power, pink noise) |
||||||
Idle (typ) |
9.4A |
13.6A |
13.0A |
15.8A |
19.6A |
22.6A |
Idle (max) |
21.8A |
33.8A |
42.0A |
54.0A |
68.0A |
80.0A |
Signal to Noise (20 Hz-20 kHz, unweighted) |
>98dB |
>105dB |
>108dB |
>110dB |
>111dB |
>112dB |
Output Circuitry: |
Class-AB |
Class-AB |
Class-H |
Class-H |
Class-H |
Class-H |
Power Cable |
15A Edison |
20A Edison |
20A Edison |
20A Edison |
30A Twist |
30A Twist |
Net Weight |
22.0 lbs. |
22.0 lbs |
23.0 lbs. |
23.0 lbs. |
24.0 lbs. |
24.0 lbs. |
Shipping Weight |
27 lbs. |
27.lbs |
28.0 lbs |
28.0 lbs. |
29.0 lbs. |
29.0 lbs. |
|
||||||
All Models |
||||||
Distortion (SMPTE, typical), 8Ω load, 10dB below rated power: <0.01% |
||||||
Distortion THD+N, typical), 8Ω load, 10dB below rated power: <0.01% |
||||||
Frequency Response: 20 Hz - 20 kHz, +/- 0.15dB |
||||||
Damping Factor: - 8 ohm load, >400 |
||||||
Input Impedance: 20 k ohms, balanced |
||||||
Maximum Input Level: +21dB |
||||||
Input Gain: 26dB, 32dB or 1.5V (Selectable) |
||||||
Control Network: onboard, standard 10/100 Ethernet |
||||||
Load Protection: Adjustable Clip Limiter |
||||||
Cooling: Temperatur dependent speed controlled fan, Front-in, Rear-out flow |
||||||
Front Panel Indicators per channel: Clip, -6dB, -12dB, -18dB, Temp, Current |
||||||
Front Panel Indicators: Power, Standby, Bridge Mono, Parallel Mono, Comm |
||||||
Attenuators: 1 per channel, calibrated/stepped, Software, Offset, Remote |
||||||
Input Connectors: XLR female/TRS, Euroblock, XLR male (looping) |
||||||
Output connectors: Speakon, Screw terminal (800, 1200) Speakon (1800, 2400, 3000, 3800) |
||||||
Protecton: inrush current limitation, temperature monitoring heat-sinks, output DC protection, power transistor SOA protection, output over-current protection, mains fuses protection |
||||||
Dimensions: 19" x 3.5" x 15.5" (88.9mm x 483mm x 394mm) |
||||||
Specifications
